Bathtub refinishing in Mesa, AZ
Mesa is older than most people think — its downtown neighborhoods date to the early 1900s, and west Mesa filled in during the 1950s through the 70s. That means a lot of cast iron and steel tubs that are worth refinishing.
- Cast iron and steel tubs
- One visit, about three hours
- Flat $475, 5-year warranty
What kind of tubs Mesa was built with
The historic districts around downtown Mesa — West Second Street, Evergreen, Robson, Temple — hold some of the oldest houses in the East Valley, with cast iron tubs to match. Fraser Fields and the streets west toward Dobson Road are post-war ranch homes with steel tubs.
Dobson Ranch, started in the early 1970s, is classic steel-tub territory: solid houses, original bathrooms, tubs in harvest gold and almond that are structurally fine and visually tired.
East Mesa is a mix. Site-built homes in Alta Mesa, Red Mountain and Las Sendas are newer and often have acrylic tubs. The many 55+ communities and resort parks have manufactured homes, whose tubs are almost always plastic. We are glad to check a photo before you plan anything.
Neighborhoods we cover
Not listed? If you are anywhere in or near Mesa, we most likely come to you.
What tubs in Mesa usually need
Old-town cast iron
Downtown Mesa bungalows still have their original tubs. A new surface keeps them in service without disturbing plaster walls or period tile.
Dobson Ranch steel
The 1970s steel tub with a rust ring at the drain is the most common job in west Mesa — and a routine repair.
Winter visitors
If you are in Mesa for the season, schedule the tub for a day you are out. It is ready the next day and there is no smell to air out.
The same visit, wherever you are in the Valley
Send a photo, get a confirmed price, pick a day. The work itself takes about three hours and the tub is ready 24 hours later.
-
Sand the whole tub
The entire tub is ground and sanded, not just the bad spots. Old caulk, loose coating and rust come off, and the new finish gets a surface it can grip.
-
Deep-clean and dry
The tub is etched, washed, neutralized and washed again, then dried completely — seams included — and wiped down with alcohol. Nothing is left between the tub and the coating.
-
Seal, repair, mask
New flexible caulk goes around the tub, chips and rust spots are repaired, and the tile, floor and fixtures are masked.
-
Pour the coating
The coating is poured along the rim. It runs down the walls, levels itself and closes over the caulk line into one seamless white layer. 24 hours later the tub is ready.
Bathtub refinishing in Mesa: common questions
Do you refinish tubs in manufactured homes and park models?
Generally no, because their tubs are plastic. If a magnet sticks to yours, send a photo — a few older units do have steel tubs.
Do you come out to East Mesa and Las Sendas?
Yes. East Mesa is within our regular service area.
Can you do the work while we are away for the summer?
Yes, if someone can let us in and the air conditioning is left on. The finish needs normal room temperature to cure.
Is Leisure World covered?
Yes. Homes there were built from the 1970s on and many have steel tubs.
Other cities we serve
Send a photo. Get a real price today.
No home visit needed for a quote. A photo of the tub is enough for us to confirm the price and offer a date.
- Text a photo of your tub to (602) 733-0000, or use the form.
- We confirm the price — $475 for a standard tub — and a day.
- One visit of about 3 hours. The tub is ready to use 24 hours later.